Alloy Wire

Contact Information

AM Wire Pte Ltd,
3, Rhu Cross,
#06-03, Costa Rhu,
Singapore 437433

Tel: (65) 9617 5912

Nickel® 201
Nickel alloy products page

Products Page

Request a Quote

Request a Quote

Download TDS

Download Datasheet

Nickel® 201

Available in any of the 'profile options'

A commercially pure Nickel (typically 99.6% Nickel), Nickel 201 is essentially the same as Nickel 200, but with a lower Carbon content to prevent embrittlement by inter granular carbon at temperatures over 315oC (600oF). Lower carbon content also reduces hardness.

Nickel® 201 is also known as Phyweld 201.

Chemical Composition Specifications Designations Key Features Typical Applications
Element Min % Max %
Ni 99.0
Cu 0.25
Fe 0.40
C 0.02
Si 0.35
Mn 0.35
Mg 0.20
Ti 0.10
S 0.01
Co 2.00
BS 3076 NA12
W.NR 2.4061
W.NR 2.4068
UNS N02201
AWS 071
Low-carbon version of Nickel 200.
Preferred to Nickel 200 for applications involving exposure to temperatures above 315°C (600°F).
Resistant to various reducing chemicals & caustic alkalies.
Good magnetostrictive properties.
High electrical and thermal conductivity.
Good ductility and low work hardening rate.
Good weldability and solderability.
Electronic components.
Electrical components.
Lead in wires for heating elements.
Battery connections/terminals.
Chemical processing.
Aerospace components..
Food processing.
Synthetic fibre processing.
Density 8.89 g/cm³ 0.321 lb/in³
Melting Point 1446°C 2635°F
Coefficient of Expansion 13.1 μm/m °C (20 – 100°C) 7.3 x 10-6 in/in °F (70 – 212°F)
Modulus of Rigidity 82 kN/mm² 11893 ksi
Modulus of Elasticity 207 kN/mm² 30000 ksi
Electrical Resistivity
8.5 μΩ • cm 51 ohm • circ mil/ft
Thermal Conductivity
79.3 W/m • °C 550 btu • in/ft2 • h • °F
Condition Approx. tensile strength Approx. operating temperature
N/mm² ksi
Annealed 400 – 500 58 – 73 Tensile strength and elongation drop significantly at temperatures above
315°C (600°F). Service temperature is dependent on environment, load and size range.
Hard Drawn 700 – 900 102 – 131

The above tensile strength ranges are typical. If you require different please ask.

*Trade name of Special Metals Group of Companies

Alloy Wire
Contact us for more information